Now, the application technology of silicone has continuously penetrated into all walks of life, and the application and requirements of silicone products in different industries are also reflected in different aspects. For example, the manufacturing industry will use silicone products for kitchenware, silicone products for mobile phone cases, and silicone products for baking.
At the same time, in the process of producing silicone products, there are often many unfavorable factors that affect the production capacity, thus affecting the delivery time and causing the loss of the factory. Since it is affected by many bad factors, then we can find the reason, improve the bad and reduce the loss of the factory. Today, Weishun Silicone will introduce to you the causes and methods of improvement in the production process:
1. In terms of material selection, the most important point in the production of silicone products is the selection of materials. If the material is not selected properly, it will lead to product quality problems in the subsequent production process, which will lead to a series of problems such as customer refunds and complaints. So be sure to choose the right material.
2. The thickness of the produced silicone products is uneven. If it is too thick, the mold temperature can be appropriately lowered and the vulcanization time can be extended.
3. If there is a bulge, it is caused by immaturity, and the curing time can be appropriately increased.
4. Open glue, open glue is generally a problem of silicone raw materials. At this time, it is necessary to check whether there is a problem with the original material.
5. The surface of silicone products is easy to be frosted, so it is necessary to master the upper limit of several ingredients that are easy to be frosted.
6. There are micropores on the surface of silicone products, mainly because the raw materials have too much moisture, and the raw materials should be dried before use.
7. Silicone products produce trapped air, mainly related to the mold, so the mold design should consider the exhaust problem.
8. There are bubbles on the surface of silicone products, which can improve the temperature of the lower mold, the time of fluidization and the number of exhausts.
9. The silicone products are not familiar, and the temperature and fluidization system are also improved.
We do not seek reasons for customer complaints, nor explain due to quality. In the production process, there are many factors that affect the unfavorable factors of silicone products. As long as we can check every layer from raw materials to quality inspection, and strictly follow the requirements, we can produce silicone products that satisfy customers.
Post time: Jan-14-2022